Can anyone give me details on building a retaining wall with railroad ties? - building a railroad tie retaining wall
There are certain things you should know before you start.
- The wall must be in a corner of the earth as you try to assist you. I want the links again set about 1 cm for each level. To do so, as the wall in recent years, hardly verticle.
Wood - Second, it must be pressure treated to prevent left to rot.
- The bonds, together with the tips, which are 2-3 inches longer than the bonds are secured extensively. When bonds 6 centimeters, points should be 8 cm long.
- Depending on the height and length of the wall, you've probably put a little "anchor links" on the wall. In about 3-4 meters above the ground, approximately every 16 meters wide in half, and tie back to the earth anchor behind the wall. This helps to resist in motion.
Therefore, it is necessary to dig a trench to a year and a half "Deep Linking" at the base of the wall. Second, exposure of the first links in the database. Then the second series set of links, offset about 1-2 cm from the first series of bonds. DrillGuide to the nail holes at each end of the links above. The pilot hole at the bottom of the tie. Each of the peaks, two at each end in a draw. Repeat. Do not forget to secure their relationships over the wall anchor. Fill behind a wall so that drainage.
Tuesday, January 12, 2010
Building A Railroad Tie Retaining Wall Can Anyone Give Me Details On Building A Retaining Wall With Railroad Ties?
3 comments:
good start - will stagger the joints to make ends meet - drilling and bars stretch along the wood stay up to date
good start - will stagger the joints to make ends meet - drilling and bars stretch along the wood stay up to date
Before any construction, contact local council do not allow certain something to add a property, unless permission is different if you build it, and someone tried to buy the property, it goes against you, and you will be demolished, a professional to do so.
Post a Comment